Ring oss på 08-36 36 36
Tel. tider: mån-tors 8,30-16,30
fredag 8,30-14,00
    Prenumerera på vårt nyhetsbrev, få rabatter och erbjudanden!


    Klicka för förstoring
    The SID−DP is a DGKat™ twisted pair transmitter and step−in commander for DisplayPort and unbalanced stereo audio signals. The unit includes a “Step−In” button that allows the local source to be routed as the active source on the main display through the main switcher.
    • HDTV Compatible.
    • Inputs - DisplayPort and unbalanced stereo audio on a 3.5mm mini jack.
    • Output - DGKat™ twisted pair on an RJ−45 connector.
    • Control - Step−in button and contact closure.
    • DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
    • Cable - Requires STP (shielded twisted pair) cable. For optimum range and performance, use Kramer's BC−DGKat623 or BC−DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non−Kramer CAT 6 and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
    • Compatible Switcher - VP−81SID.
    • Power Connect™ System - A single connection to the VP−81SID Switcher can power the unit.
    • Compact DigiTOOLS® - 3 units can be rack mounted side−by−side in a 1U rack space with the optional RK−3T rack adapter.



    Copyright © 2017 Konferens & Mediateknik AB | En webbutik från Combiz.se